Crafts lets have fun

Article by: Lisa Carroccio The Domestic Diva
DIY: TULLE GARLAND TUTORIAL


I’ve always used tulle when decorating my Christmas tree. It’s the secret to making a cheap tree look full. Basically, I’d “stuff” the tree with tulle and call it a day. However, this year since I now have a full pre-lit Christmas tree, I needed to somehow find a way to incorporate tulle into my tree. What better way than to Tulle Garland?!
All you need is a serger and a few rolls of 6 inch tulle in whatever color you like. The color choices are endless. I used 4 rolls (100 feet each) of “Old Gold Shimmer” tulle. Tulle rolls are sold in increments of 25, 75 and 100 feet. Be sure to buy as much as needed or you’ll be making additional trips to the craft store like I did.


Serger Settings:
4-thread overlock
Gathering Serger Presser Foot (if you have one)
Left and Right Needle Tension = 8
Upper and Lower Looper Tension = NORMAL
Stitch Length = 5 (or highest available setting)
Differential Feed = 2 (or highest available setting)
Note: You can use a sewing machine to gather your tulle, but the serger makes it a fast project…and I’m all about speed.





With the roll of tulle in front of the machine, on your lap or on the floor (like I do), fold tulle in half as it comes off the roll (folded edge to the left). Use your right hand to guide tulle through the serger cutting off 1/4 inch. With your left hand, place two fingers behind the presser foot to prevent the tulle from feeding freely.




This helps the tulle gather even more. When your fingers can no longer hold the tulle from behind the machine, let it go. Repeat until you’ve gathered all your tulle needed.





Once you’ve gathered all your tulle, you’ll need to “poof” it by separating the two layers of the tulle.




This is what 400 feet of gathered tulle garland looks like. Just enough to decorate a 7 foot Christmas tree. Total cost…under $15! Being the envy of all your friends…priceless!

You might also like: